Belt drier machine

1.belt drier machine
2.got patent ZL99229732X
3.continous drying
4.adjustable according to the different characteristic.
Drier description:
The materials are uniformly put on the mesh-belt drier by the material charger. The mesh-belt uses generally 12 - 60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device

The drier iscomposed of several units. For each unit, the hot air is circulated separately. In the first unit, air out from circutation air blower(5) pass through beside into Iow unit, after air is up and heated by steam heater(4),be shared by seperater(3), the air is spraied through mesh-belt in to top of machine. The drying process ishot air passes through the mesh-belt covered with a special moisture from the top to the bottom or from the bottom to the top,and this will complete the heat and mass transfer process. The air pipe of the top is conected with fan, one part of air is circulated, some exhausted gas is discharged with a special moisture eilmination blower, and other waste gas is controlled through an adjustment valve. The top and Iow circulation units can be freely equipped according to the users' demand,The unit number can be selected according to the demand.

China Modern Drum Dryer With High Quality

China Drum Dryer
1)50 Years' Experience
2)Professional Design
3)Delicate Technique
4)EPC or EP Accepted
China Modern Drum Dryer With High Quality

Applications of Dryers:
A dryer is a kind of mechanical equipment which uses heat energy to reduce the water content of materials.
Industrial drying equipment is mainly used in building materials manufacturing, metallurgy and chemical industry, and cement production industry, etc. to dry mineral slag, limestone, coal powder and clay, etc.
If used in combination with our coal gasifier, our dryer can also be used for fine chemical drying.
Our industrial dryers are also regularly used in compound fertilizer production lines.
Features:
1. Our dryer is designed with anti-sticky drum-wall and assembled material-lifting board.
2. This drying equipment is d ivided into secondary-granulating section, balling section, polishing section and drying section, etc. What worth mentioning is that our dryer features convenient installation and transportation as a result of its flange connection.
3. This large sized drying equipment is primarily composed of vibrating feeder, heating furnace, drying device, and air intake and air outlet device, and more.
The vibrating feeder enables materials to spread uniformly on the mesh belt.
An air-intake fan with large air flow blows away water content of materials, and then the water content will be discharged from the air-outlet.
4. Our dryer has the features of low noise, little pollution and good drying effect.
Working Principle:
Dying process needs to consume large amount of heat energy. In order to save energy, some materials with high moisture content, suspending liquid and solution which contain solid objects should be mechanically dewatered or heated first, and then th ey can be dried in a dryer to get dry solids.
During drying process, heat and weight (moisture content) transfer need to be finished simultaneously, thus guaranteeing a higher moisture and water vapor partial pressure inside the dryer than that outside the dryer, and guaranteeing a higher temperature of heat source than that of materials.
Technical Parameters of Dryers:
Specifications
Drum
Production capability
Flow direction
Reducer
Motor
Weight
Inner diameters
Length
Dig angle
Rotate speed
Model
Power
m
mm
mm
°
r/min
t/h


kw
t
Φ1.5*14
1500
14000
2.5
4.28
3-4
Concurrent flow
JZQ500
15
21.0
Φ1.8*15
1800
15000
2.5
5
5-7
JZQ600
18.5
27.0
Φ1.8*18
1800
18000
2.5
5
5-7
JZQ600
18.5
30.0
Φ1.8*20
1800
20000
2.5
5
5-8
JZQ650
18.5
31.0
Φ2.0*20
2000
20000
2.5
3 .38
7-10
JZQ650
22
43.0
Φ2.2*22
2200
22000
2.5
2.8
8-14
JZQ650
30
50.0
Φ2.2*24
2200
24000
2.5
2.8
8-14
JZQ650
37
52.0
Φ2.4*24
2400
24000
2.5
2.82
12-16
ZL750
45
70.0
Φ2.6*26
2600
26000
2.5
2.58
14-18
ZL100
55
84.0
Φ2.8*28
2800
28000
2.0
2.55
18-20
ZL115
75
100.0
Φ3.0*28
3000
28000
2.8
2.69
20-22
ZL130
110
130.0

Economical and best quality drum dryer/rotary drier

best quality drum dryer
1.dry slag,clay and other material
2.easy to operate
3.excellent equipment

Economical and best quality drum dryer

rotary drum dryer/rotary drier/rotary sand drier
is mainly consist of rotary body, raw material feeding plate, driving and supporting device, etc. Its principle of operation: the raw material plate which is arranged reasonably with changeable angles in order, throws moisture materials into the rotary cylinder. Then water will be separated from the materials by hot air-flow and changed into vapour to be discharged into the atmosphere. Then the materials would be dryed.
Rotary drier
is used to dry slag, clay, limestone, It is mainly used for cement, chemical, metallurgical, building materials industries. Its advantages are as follows: high dry capacity, smooth rotation, low energy consumption, easy operation, high output and so on.

rotary drum dryer/rotary drier/rotary sand drier

is used for drying materials with a certain humidity or granularityin milling of ores, building materials, metallurgy and chemical industry.Gyro drying machinery has a strong adaptability of materials and it can dry various materials. The operation is very simple and liable. For this reason, it isused widely.
Indirect heat transfer drier It is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
rotary drum dryer/rotary drier/rotary sand drier main parameters
Model and specification
Simplified
Appearance size
L×W×H
(mm)
Weight (t)
Volume(m
3
)
Speed (r/min)
Gradient(%)
Capacit y(t/h)
Motor power (kw)
ZT-1×10
7.85
6.73
3-5
3.3-4.9
5.5
10000×1876×2069
7.5
ZT-1.2×1.2
11.31
5.8
3-5
4-6
11
12000×2159×2475
13.1
ZT-1.5×12
21.2
4.8
3-5
5-8
15
12000×2655×2895
22.3
ZT-1.8×14
35.6
45
3-5
5-10
18.5
14000×3060×2980
31
ZT2.2×14
48.4
4.3
5
7-12
22
14000×3620×3570
38.8
ZT-2.4×14/22
63.3
3.78/3
4
10-16/25
30/37
14000×3800×3760
50.7/67.8

First-class and high productivity rotary dryer for coal,limestone,sand

Hot sale rotary dryer:
1.Easy structure;
2.Top-grade raw material;
3.OEM service offered;
4.20 years practice in this line..
Rotary Dryer
Rotary dryer is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc.
This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature.
Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.

Components:
Rotary dryer is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc.
(Optional auxiliary equipment includes combustion chamber, feeder and discharging device, and dust collection equipment).
Rotary drier manufactured by u s adopts new lifting plate, which is of functions like guiding, current-sharing, and material raising.
The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency.
Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.

Working Principle:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method.
When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.


Tecnical parameters:

model
heat direct and sequence
heat direct and retrograde
compound heating
type of material
mineral
HP

ammonium sulphate
phosphorus fertilizer
coal
capacity kg/h
1000
-66
15000
20000
12000
5000
primary moisture %
30
13
6
1.5
5
6.5
final moisture %
15
0.3
1
0.1
0.1
0.1
average dim. mm
6.5
0.05
4.7
0.5-0.7
0.5
5
thickness of material mm
770
800
1890
1100
1500
750
capacity of hot air kg/h
39000
5400
10750
9800
6500
16000
temp. of air in
600
165
500
180
650
570
temp. of material out

42
100
70
80
75
heating style
gas
steam electric+heating
heavy oil
coal fuel furnace
heavy oil
heavy oil
ratio of feed

6.3
7
7.5
7.8
18
rotation speed rpm
4
4
3.5
3
4
2
angel
.
0.04
0.005
0.03
0.05
0.05
0.043
quatity of oar
12
24
12
22
8
16
6
12
dim. of drier m
2.0
1.5
2
2.3
2
0.84
24
0.95
length of drier m
20
12
17< br>15
10
16
driving power kw
22
7.5
15
11
1


Pictures for your reference:

Rotary Drying Mechanism

Rotary Drying Mechanism
Competitive in price
Excellent in quality
High Efficiency
Simple Structure.
Rotary Drying Mechanism
Applications of Dryers:
A dryer is a kind of mechanical equipment which uses heat energy to reduce the water content of materials.
Industrial drying equipment is mainly used in building materials manufacturing, metallurgy and chemical industry, and cement production industry, etc. to dry mineral slag, limestone, coal powder and clay, etc.
If used in combination with our coal gasifier, our dryer can also be used for fine chemical drying.
Our industrial dryers are also regularly used in compound fertilizer production lines.
Features:
1. Our dryer is designed with anti-sticky drum-wall and assembled material-lifting board.
2. This drying equipment is divided into secondary-granulating section, balling section, polishing section and drying section, etc. What worth mentioning is that our dryer features convenient installation and transportation as a result of its flange connection.
3. This large sized drying equipment is primarily composed of vibrating feeder, heating furnace, drying device, and air intake and air outlet device, and more.
The vibrating feeder enables materials to spread uniformly on the mesh belt.
An air-intake fan with large air flow blows away water content of materials, and then the water content will be discharged from the air-outlet.
4. Our dryer has the features of low noise, little pollution and good drying effect.
Working Principle:
Dying process needs to consume large amount of heat energy. In order to save energy, some materials with high moisture content, suspending liquid and solution which contain solid objects should be mechanically dewatered or heated first, and then they can be dried in a dryer to get dry solids.
During drying process, heat and weight (moisture content) transfer need to be finished simultaneously, thus guaranteeing a higher moisture and water vapor partial pressure inside the dryer than that outside the dryer, and guaranteeing a higher temperature of heat source than that of materials.
Technical Parameters of Dryers:
Specifications
Drum
Production capability
Flow direction
Reducer
Motor
Weight
Inner diameters
Length
Dig angle
Rotate speed
Model
Power
m
mm
mm
°
r/min
t/h


kw
t
Φ1.5*14
1500
14000
2.5
4.28
3-4
Concurrent flow
JZQ500
15
21.0
Φ1.8*15
1800
15000
2.5
5
5-7
JZQ600
18.5
27.0
Φ1.8*18
1800
18000
2.5
5
5-7
JZQ600
18.5
30.0
Φ1.8*20
1800
20000
2.5
5
5-8
JZQ650
18.5
31.0
Φ2.0*20
2000
20000
2.5
3.38
7-10
JZQ650
22
43 .0
Φ2.2*22
2200
22000
2.5
2.8
8-14
JZQ650
30
50.0
Φ2.2*24
2200
24000
2.5
2.8
8-14
JZQ650
37
52.0
Φ2.4*24
2400
24000
2.5
2.82
12-16
ZL750
45
70.0
Φ2.6*26
2600
26000
2.5
2.58
14-18
ZL100
55
84.0
Φ2.8*28
2800
28000
2.0
2.55
18-20
ZL115
75
100.0
Φ3.0*28
3000
28000
2.8
2.69
20-22
ZL130
110
130.0

high quality coal slime dryer

1. several types of raise plate.
2.Low energy consumption
3.Reliable mechanical structure
4.short drying...
Rotary dryer’s operating principle:
Dry and wet material from the belt conveyor or bucket elevator to the hopper,
then by feeding machine of hopper through charging pipe into the feed side. Feeding pipeline’s slope than the natural material, in order to materials smoothly into dry containers.Drier with the horizontal cylinder is a slightly into tilted rotating cylinder. Material from high end to join, heat body by low-end enter, with material into counter-current contact, also have heat body and materials together and flow into the barrel. with the cylinder rotate by gravity materials to a run on the bottom of the end. Wet materials in the cylinder body forward movement process, directly or indirectly got he at body heat, make wet materials to dry, then the discharge end by the belt conveyor or screw conveyor sent. In the cylinder body wall with copy plate, It is the function of the material copied up and planted,make the material and the airflow contact surface increases to improve the drying rate and to promote material progress. Heat-carrier is generally divided into hot air and flue gas. After the heat-carrier by the dryer, generally need the cyclone to trap the material of the gas down. through the bag filter or wet dust collector and then put emissions,if you want to reduce dust content of exhaust gas.

large capacith biomass powder drying machine with 50%energy saved

biomass powder drying machine
1.large capacity
2.humanizing design
3.easy to operate and maintain
biomass powder drying machine

introduction on drying machine
drying

is important before briquetting process. To get the superior quality of biomas briquettes with high density ,it is necessary to control the moisture of material at
8-12% exactly.
The selection of drying plant modles depends on the original moisture content of raw materials.
The whole machine is consists of
fan blower,motor engine,fuel bolier, steel pipe,cyclone and air lock
.In this system ,wet raw material is input into hopper by screw feeder .Then the large volum of hot air produced by the fuel furnace mixed with the wet powder in the steel pipe and moved through curving pipes and drying chamber by the power of fan blower.As t he material traverses along the steel pipe,it keeps the suspending state together with the fast mouved hot air and moisture envaporates and is rendered dry at the discharge end .humid air is continuously exhausted,thus the material is dried



Dryer machine

is widely used in the straw briquette fuel ,charcoal machine ,biomass powder pellet fuel,sawdust briquetting ,agriculture and animal husbandry projects and some other industries. Such as straw drying ,sorghum stalk drying,wood dryin g,drying of wood shavings,ginkgo leaf drying ,mulberry leaves drying and the drying of other agriculture cellulose
r a w m a t e r i a l

Big laundry pertroleum Drying Machine

Big laundry pertroleum Drying Machine
1, Reasonable price
2, Work fast
3, Environment protection design
4, Big drum
Big laundry pertroleum Drying Machine

1,YHG series automatic are used for drying after washing dehydration via and the types of fabric.
2,It uses the automatic control, the designation drying time, discrete sampling for automatical revolve or reverse revolve drying, and automatic stop at the appointed time .
3,Can look over the clothing drying Situation at any time through the large feeding gate with the big visual prestraining grass.
4,This equipment is the compact structure vertical bin that can be installed in the narrow place.
5,YHG automatic dryer door, close the door, automatically discharging automatic tilt, greatly easing the labor force, and improves work efficiency.
6,The YHG microco mputer series dryer, has the temperature control and completely automatic operation,
7,Dry rapidly, energy saving efficient, low noise, anti dust blower for improving the working environment. Have two kinds of steam heating steam and dual-use electric steaming type.

Model
YHG-10A
YHG-12A
YHG-15A/B
Rated capacity(kg)
10
12
15
Roller speed (R/min)
40
40
40
Motor power (Kw)
0.55
0.55
0.55
Fan powe r (Kw)
0.13
0.13
0.13
Dimension (L×W×H)(mm)
1060×780×1630
1060×780×1630
1060×780×1630

coal slurry rotary dryer

coal slurry rotary dryer
1.Large capacity.
2.Low energy consumption
3.Widely used
4.ISO

picture of
coal slurry rotary dryer





description of
coal slurry rotary dryer

The main structure of the coal slurry rotary dryer
:
1. Main tube body, front roller circle, rear roller circle, gear, side plate of rolls, Small gear, outlet part, reduce box, motor, heated air duct, inlet month And furnace body and other structure.
2. The fuel can be coal, fire, gas, and electricity and other fuel.
3. We can design the gas generator furnace, firebox, and euipped elevator, Belt conveyor, constant feeding machine, dust collector cyclone. Draft fan and so on.

Description of coal slurry rotary dryer:

1. This kind of Rotary Dryer is used for drying food, mineral dressing, buildin g material, metallurgy and chemical, industrial drying slag cement limestone, coal, slag, clay and other materials.
2. The advantage of this rotary dryer is a reasonable structure, well-produced, high yield, and low energy consumption, operating convenience.
3. Dryer capacity will depend on the material properties, moisture content, drying temperature varies.

parameter of
coal slurry rotary dryer

type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(º C)
motor power(kw)
outpur(t/h)
weight(t)
Φ 600× 6000
3—5
3—8
≤ 700
3
0.5-1.5
2.9
Φ 800× 8000
3—5
3—8
≤ 700
4
0.8-2.0
3.5
Φ 800× 10000
3—5
3—8
≤ 700
4
0.8-2.5
4.5
Φ 1000× 10000
3—5
3—8
≤ 700
5.5
1.0-3.5
5.6
Φ 1200× 10000
3—5
3—8
≤ 700
7.5
1.8-5< br>14.5
Φ 1200× 12000
3—5
3—8
≤ 700
11
2—6
14.8
Φ 1500× 12000
3—5
2—6
≤ 800
15
3.5-9
17.8
Φ 1800× 12000
3—5
2—6
≤ 800
18
5—12
25
Φ 2200× 12000
3—5
1.5-
≤ 800
18.5
6—15
33
Φ 2200× 18000
3—5
1.5-6
≤ 800
22
10—28
53.8
Φ 2200× 20000
3—5
1.5-6
≤ 800
30
12—20
56
Φ 2400× 20000
3—5
1.5-5
≤ 800
37
18-30
60
Φ 2800× 15000
3—5
1.5-5
≤ 800
40
20-35
72.5
Φ 2800× 18000
3—5
1.5-5
≤ 800
40
25-35
75
Φ 3000× 20000
3—5
1.5-5
≤ 800
55
28-40
78
Φ 3000× 25000
3—5
1.5-5
≤ 800
75
32-45
104.9

Rotary dryer equipment/ drying machine / dryer

Drier:
1.competitive price
2.handling capacity.
3.Easy operation and maintenance.
4.Simple and reliable structure
Detail description:
Drier is a cylinder,its main body is a litte bit slantwise,and the rotate speed can be adjusted within bounds.Wet raw materials are sent into cylinder, the materials are well-distributed and dispersed after be turned over by shovelling plate,then the materials contact with the hot air fully,the drying is accerlated.Shovelling plate can be selected to meet different materials

This dryer is particularly suitable for drying big granules in chemicalindustry,minerals,metallurgy industry,and so on.It can also dry special powder and granule material,such as lightweight calcium carbonate,floridin,magnetic particle,graphite,and dregs of a decoction ,the drying temerature should be low, and the raw material should be dried continuously in large scale.

technical parameter
item(m)
priductive capacity(t/h)
revolution(r/min)
motor power(Kw)
install angle(
.
)
Temp.of final
Φ1.0×5.0
0.5-1.2
0.6-6
4
3-5
≤1.5%
Φ1.2×6-10
1.5-3
0.6-6
5.5
3-5
≤1.5%
Φ1.5×12-18
3-5.5
0.6-6
15
3-5
≤1.5%
Φ1.8×12-18
5-6.5
0.6-6
18.5
3-5
≤1.5%
Φ2.2×12-22
7-12
0.6-6
22
3-5
≤1.5%
Φ2.4×15-20
9-15
0.6-6
30
3-5
≤1.5%
Φ3.0×25
16
0.6-6
55
3-5
≤1.5%

model
heat direct and sequence
heat direct and retrograde
compound heating
type of material
mineral
HP

ammonium sulphate
phosphorus fertilizer
coal
capacity kg/h
1000
-66
15000
20000
12000
5000
primary moisture %
30
13
6
1.5
5
6. 5
final moisture %
15
0.3
1
0.1
0.1
0.1
average dim. mm
6.5
0.05
4.7
0.5-0.7
0.5
5
thickness of material mm
770
800
1890
1100
1500
750
capacity of hot air kg/h
39000
5400
10750
9800
6500
16000
temp. of air in
600
165
500
180
650
570
temp. of material out

42
100
70
80
75
heating style
gas
steam electric+heating
heavy oil
coal fuel furnace
heavy oil
heavy oil
ratio of feed

6.3
7
7.5
7.8
18
rotation speed rpm
4
4
3.5
3
4
2
angel
.
0.04
0.005
0.03
0.05
0.05
0.043
quatity of oar
12
24
12
22
8
16
6
12
dim. of drier m
2.0
1.5
2
2.3
2
0.84
24
0.95
length of drier m
20
12
17
15
10
16
driving power kw
22
7.5
15
11
11
15
Sinon Machinery Manufacturing Co., Ltd.
Address:Nor th of Yong’an Road, Gongyi city,Henan Province,China
Tel:+8637169537555
+8637164373688
Fax:+8637164373899
Mobile:+86 15890105509

2011 China New drying machinery with good quality

drying machinery
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sale
drying machinery
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constan tly improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:

Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000

3-5

3-8
≤700
4
0.8-2.0
3.5
Φ800×10000

3-5

3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000

3-5

3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000

3-5

3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000

3-5

3-8
&le ;700
11
2-6
14.8
Φ1500×14000

3-5

2-6
≤800
15
3.5-9
17.8
Φ1800×14000

3-5

2-6
≤800
18
5-12
22
Φ2200×16000

3-5

1.5-6
≤800
30
12-25
36
Φ2400×18000

3-5

1.5-5
≤800
37
18-30
52
Φ3000×20000

3-5

1.5-5
≤800
55
25-35
80
Φ3000×25000

3-5

1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone.
Showcase:

Model(GMP) Oven FOR Medicine Use

1,Inner wall is fully welded
2,Many kinds of heat source for choice
Description

Three kinds of heat source are used for heating : electricity, steam+ electricity.
Operation temperature: steam,50-140°C. Max.150°C, electricity,50~350°C. The temperature can be controlled automatically. Moreover it can be recorded through recorder.
The inner wall of oven body is fully welded. Each transition adopts circular arc and no dead.
The seal property of whole machine is good. Being adopted unique guide rail seal apparatus, the seal property can be guaranteed.
The air inlet is equipped with high effective air filter and the damp exhaust outlet is equipped with middle effective air filter.
The double doors of oven adapt mechanical interlock apparatus.
All parts inside the oven can be assembled and disassembled quickly in order to clean conveniently.
The control system has test display and touch screen for your choice.
The whole machine is in conformity with the requirements of GMP.

Parameters
Parameter/model
Drying amount each time
(Kg)
Power of fan(KW)
Steam consumption(Kg/h)
Drying trolly
(set)
Baking tray
(piece)
W×D×H(mm)
Temperature difference
(°C)
GMP-0
35
0.45
8
/
16
1130×1100×1750
±2
GMP-I
120
0.45
18
2
48
2300×1200×2000
±2
GMP-II
240
0.9
36
4
96
2300×2200×2000
±2
GMP-III
360
1.35
54
6
144
2430×2200×2000
±2
GMP-IV
480
1.8
72
8
192
4460×2200×2290
±2

Slag/ coal dryer in selling( 5% discount)

Slag/ coal dryer for coal, coal slurry, slag, industrial waste, and clay stone.
Advantage of Slag/ coal dryer :
1. High thermal efficiency
2. Low temperature in outlets
3. Alloy steel plate or stainless steel plate
4. Convenient transportation

Technical Specifications for your reference:
Type
Inclination
(%)
Rotation speed
(r/min)
Input temperature
(ºC)
Motor power
(kw)
Capacity
(t/h)
Weight
(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000
3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×12000
3-5
2-6
≤800
18.5
3.5-9
17.8
Φ1800×18000
3-5
2-6
≤800
22
5-12
31
Φ2000×18000
3-5
1.5-6
≤800
30
6-15
43
Φ2200×18000
3-5
1.5-6
≤800
37
10-18
52
Φ2400×20000
3-5
1.5-5
≤800
45
18-30
60
Φ2800×20000
3-5
1.5-5
≤800
55
25-35
72
Φ3000×20000
3-5
1.5-5
≤800
55
32-40
91
Φ3000×25000
3-5
1.5-5
≤800
75
40-55
104.9

Export countries:
United Kingdom, Italy, Greece, etc.

Efficient Industrial drier

Industrial drier.High dry capacity, smooth rotation,
2.Low energy consumption,
3.Easy operation, high output.
1.Industrial drier
Rotary Drier(also called Rotating Bowl Drier) is widely used in building material, metallurgy, chemical industry, cement to dry the slag, limestone, coal powder, clay, etc. It mainly consists of lifting blade, transmission device, supporting device, seal ring, etc.
Feature of Rotary Drier:
It is of simple structure, polished manufacture, high capacity, low consumption, convenient transportation and so on.

Technical parameter
model
The diameter(mm)
The length(m)
Slope(°)
Speed(r/min)
Power(kw)
Volume(m3)
0.6×8-12
600
8-12
3-5
8
4
2.26
0.8×10-10
800
10-12
3-5
7.2
4
5.02
1.0×10-12
1000
10-12
3-5
6 .73
5.5
7.85
1.2×12-18
1200
12-18
3-5
5.8
11-15
13.31
1.5×12-18
1500
12-18
3-5
4.8
15-22
21.2
1.8×12-18
1800
12-18
3-5
3.2
185-30
48.22
2.2×12-22
2200
12-22
3-5
3
22-30
70.43
2.8×15-24
2800
15-24
3-5
2.59
30-55
147.8

high capacity cement rotary dryer

high capacity cement rotary dryer
1 reliable operation
2 large operating flexibility
3 strong adaptability
high capacity cement rotary dryer
1 reliable operation
2 large operating flexibility
3 strong adaptability

Main technical parameter:
Model
(mm)
Speed (r/min)

Gradient (%)
Intake air temperature (°C)
Capacity (t/h)
Weight (t)
GZΦ800*8000
3.8
3-5
≤700
0.8-20
3.5
GZΦ1000*10000
3.8
3-5
≤700
1.0-3.5
5.6
GZΦ1200*10000
3
3-5
≤700
1.8-5
14.5
GZΦ1500*14000
2.08
3-5
≤800
3.3-7.5
17.8
GZΦ1800*14000
2.08
3-5
≤800
5-9
22
GZΦ2200*16000
4.7
3-5
≤700
6-12
36
GZΦ2400*18000
4
3-5
≤800
10-15
52

2011 China New rotary drying with high quality

rotary drying
1.Supply the whole production line layout
2.Italy technology but Chinese price
3.3 years'after-sales se
rotary drying
Gongyi Wangda Machinery Factory
, located in the west of Zhengzhou City, which has two parts, old factory is in urban nearby train station and new factory is in Zhitian Industrial Park of Gongyi.
With unique geographical condition, Wangda Machinery concentrates capital, technology, personnel, information and market as advantages, and forms to a strong company entity with more than 30,000 square meters area, 25,000 square meters standard plant and 50 million fixed assets.
Wangda Machinery always firmly follows the tenets of “reputation, best service, leading technology, quality assurance” and adheres to “people-oriented, science and technology”. We’re constantl y improving product quality, manufacturing capacity. Produced on the basis of features of home and abroad manufacturers, our aerated concrete equipments operate steadily, and have been widely used in China and exported to Southeast, Asia, Africa, the Middle East and other countries.
For the sake of users’ approbation, support and expectation, Wangda Machinery will provide machines with more advanced and better quality as well as timely and quality service.
Main Use:
Rotary dryer
is mainly for dealing with material in large quantities. As reliable operation, operating flexibility, adaptability and large capacity, this dryer is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries.
This generally adapted to granular powder materials. Through the way of mixing material partially, this dryer also can be used for drying sticky paste-like materials or materials with high water content.
Structure:
Rotary dryer
consists of drum shell, front and rear roller ring, gears, block roll, pinion, discharging part, reducer, motor, warm air duct, feed-in chute, furnace body and other components. Besides, we can design gas producer, combustor chamber or supporting elevator, belt conveyor, quantitative feeder, dust collector cyclone, induced draft fan, etc.
Technical Parameter:
Type
Inclination (%)
Rotation Speed(r/min)
Inlet Temperature
(°C)
Power(kw)
Capacity(t/h)
Weight(t)
Φ600×6000
3-5
3-8
≤700
3
0.5-1.5
2.9
Φ800×8000

3-5
3-8
≤700
4
0.8-2.0
3.5
Φ800×10000
3-5
3-8
≤700
4
0.8-2.5
4.5
Φ1000×10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
Φ1200×10000
3-5
3-8
≤700
7.5
1.8-5
14.5
Φ1200×12000
3-5
3-8
≤700
11
2-6
14.8
Φ1500×140003-5
2-6
≤800
15
3.5-9
17.8
Φ1800×14000
3-5
2-6
≤800
18
5-12
22
Φ2200×16000
3-5
1.5-6
≤800
30
12-25
36
Φ2400×18000
3-5
1.5-5
≤800
37
18-30
52
Φ3000×20000
3-5
1.5-5
≤800
55
25-35
80
Φ3000×25000
3-5
1.5-5
≤800
75
32-40
86
Remarks:
(The above capacity is on the basis of 18% moisture content of limestone. Drying capacity is different according to the difference of material features, moisture content and drying temperature.)

Showcase:

China realiable Three Cylinder Drying Machinery with competitive price

Three Cylinder Drying Machinery
1.cost-effective, low profit
2.environemental machine
3.better quality
Three Cylinder Drying Machinery

1.cost-effective, low profit
2.environemental machine
3.better quality

1.Usage
This machine is widely used in mine, building materials, chemical, metallurgy, cast industries and so on. It can dry the material such as sand, slag, clay, fly ash, coal, iron power, quartz sand, and ore and so on.

2. Feature
(1).Adopting the heat change technology, this machine has the advantage of high efficiency and less energy consumption.
(2).The efficiency of self heat preservation is higher than 80%, for single cylinder type, it is 35%
(3).Compared with the single cylinder type with same capacity, the 3cylinder type only cover the 50% ground. It will save the 50% of buil ding cost, 60% power cost, and above 60%fuel.
(4).The fuel can be coal, oil and gas.
(5).With the heat resisting, hear wearing alloy steel plates, its life is 4 times as the common steel plates.
(6).The water content of the product is less than 0.5%
(7).The temperature of out air is low, and it will increase the life of the dust catching system.
(8).Without the big and small gears, it work with riding wheel.
(9).The temperature of out air is low, and it will increase the life of dust catching system.
(1)0. Simple operation, it is easy to adjust the date of the water content of the product.

Note: any change of technical date will not inform additionally.

Fertilizer Rotary Drying machine

Fertilizer Rotary Drying machine: easy to control, good quality, high production capacity, low maintenance costs.
Fertilizer Rotary Drying machine:

Used to dry the ordures from pig and chicken which have no any chemical content bcs the pig and chicken only can digest 75% and 25% is included in ordures so that the fertilizer from them possess of plentiful Nitrogent Phosphours,Kalium,Organic Matter,Aminophenol,Protein and so on.

Model
Diameter
Length
Obiquity
Running Speed
Output
Inlet Temperature
Outlet Temperature
Motor
GG1.2*6

1200
6000
3
5
0.5-1
120-300
5.5
50-80KW

GFG Fluid Bed Dryer

1.GMP
2.Quick drying speed ( 20-30 minutes every batch)
3.Round structure avoid dead corner
GFG Fluid Bed Drier
GFG Fluid Bed Dryer


Principle:

When air is purified and heated, it is introduced from the bottom of induced-draft fan and passed through the screen plate of raw material. In working chamber, the state of fluid is formed through stirring and negative effect. The moisture is evaporated and removed rapidly and the raw material is dried quickly.

Features:
1.Operated at sealed negative pressure
2.A stirrer in the bed,avoid agglomera-tion of damp material
3.Material for bag filter :
anti-static special fiber
4.This fluid bed is round structure. So it avoid died corner.
5.Discharged by turning over. It is quick, and fully.
6.The drying speed is fast and the temperature is uniform .In general the drying time is 20-30 minutes
7.Therefore it is simple in operation and convenient in clean .It is an ideal equipment that is in conformity with the requirement of
GMP

Application:

The fluid bed drier is suitable for drying damp granule or powder material in many fields such as pharmaceutical industry, chemical industry, feedstuff industry, fooedstuff industry, etc.
Technical data:
Item
Specification
Feeding capacity
kg//batch
60
100
120
150
200
300
500
≥800
Power of fan
kw
11
15
18.5
22
22
30
37
By client
Power of stirring
kw
0.55
1.1
1.1
1.1
1.1
1.1
1.5
speed of stirring
rpm
11
consumption of steam
kg/h
141
170
170
240
282
366
451
working time
min
15-30
Installation size for reference
H1
mm
2676
2842
2862
2940
3014
3300
3650
H2
mm
2366
2532
2552
2630
2704
2800
3150
A
mm
2440
2540
2540
2740
2840
2940
3140

Chicken Manure Drying Equipment,No stink

Chicken manure drying equipment
1.Large capacity dryer machine
2.High heating drier
3.Easy to operation
ISO:9001-2008,SGS
dChicken Manure Drying Equipment
Features of Chicken Manure Drying Equipment:
Chicken Manure Drying Equipment is a low-fuel-consumption and high efficiency of drying equipment
Can be used to dry the material with a moisture content below 85% to a final moisture content below 13%
Applicable in animal farming, food brewing, sugar and pharmaceutical industries dealing with high humidity waste, as well as a variety of chemical raw materials, such as chicken manure, wine slot, furnace slag, fructose slag, slag vinegar sauce, sugar beet residue, animals slaughtered contents, coal slime, bentonite, and more
For resource development and good environmental protection equipment
Chicken Manure Drying Equi pment uses downstream drying process, especially suitable for fast drying the humidity materials which need to preserve nutrition, for example, the drying of fresh chicken manure can achieve the purposes of drying, sterilization, deodorant and preservation of nutritional
Equipped with high-speed rotating drum of crushing devices, which increases the contact area between material and drying medium, the internal unique equipment design, makes materials difficult to adhere to the drum wall panels and parade
The complete machine has the effects of heat preservation, good sealing performance, and the fact that the thermal efficiency considerably higher than the general drum drying machine
The drying equipment structure is compact, easy to install and debug, and using small floor area
Drum and crushing device use stepless speed regulating devices, which can adapt to the different requirements of the drying materials
The drying equipment can combine the use of differ ent fuels (such as coal, heavy oil, natural gas, and more)
The complete sets of equipment mainly is composed of the crushing drum drying machine, burning furnace, feed spiral, output spiral, pipeline, dust collector, airlock, air induced fan, electric control cabinet, and other components
Work principle:
Conveyed from the feed screw directly into the drying machine drum, raised by the drum wall panels repeatedly, and scattered by the crushing blow dispersion devices
Materials and the negative high-temp media are combined sufficiently to complete heat and mass transfer process
Result of the drum wind angle and induced air, feed materials move slowly, and discharged from the spiral after drying, exhaust gas handled by the dust precipitator, venting to the atmosphere

Technical specification

Model
TDG800
TDG1000
TDG1200
TDG1500
TDG1800
TDG2000
TDG2200
Capacity
≥500kg/h
≥1000kg/h
≥1300kg/h
≥1600kg/h< br>≥1800kg/h
≥2000kg/h
≥2200kg/h
Power
4kw
5.5kw
7.5kw
15kw
18kw
18.5kw
22kw
drying machine weight
5T
6T
8T
18.2T
26T
28T
35T




Note
: The capacity of above models can be achieved only after the material handled by the dewaterer